Split System Installation Burwood East

Split System Install in Burwood East

There’s nothing more satisfying than coming to your home on a hot day and switching on your split system air conditioning, and in a matter of minutes , your home and your family will be cool.

Split system air conditioning offers this versatility, making them hard to beat. But , just like all heaters or coolers to make sure they’re running optimally they must be maintained and serviced at a high level by qualified professionals. Melbourne Ducted Heating Service offers experienced technicians who know your split system air-conditioners in and out. They specialize in all brands and models offering you assurance that they will complete the task to professional standards.

We offer a wide range of services that comprise the following:

• Split System Installation Burwood East
• Split System Repairs
• Split System Servicing

Our team of heating and cooling professionals are fully qualified and licensed to complete all types of work. If you’re searching for Split System Installation Burwood East services then contact Local Heating and Cooling Professionals Burwood East today and talk with one of our helpful team members.

How Do Split Systems Work?

Systems for split air conditioners have their name due to half the system (condenser) is located outside of the house , while the other half (fan coil) is installed inside. When cooling, the warm air in the room is absorbed via the fan coil before being taken out, resulting into cool air recirculating back into the home. The reverse cycle permits that the heating system to operate in reverse, providing heating on cold winter days.

The split system of air conditioning are installed in individual rooms, zones or rooms that are connected via copper pipes with an outside unit (condenser). Split air conditioners with multiple heads can be used in at least nine rooms and just one outdoor unit and allowing for individual temperature control of each room.

What Are The Ongoing Costs With Split Systems?

One of the top brands to use for Split Systems is Mitsubishi Electric. For a Mitsubishi Electric GE Series 2.5KW Split System, installed in an area that is small, and provides regular heating & cooling during the winter and summer periods and the annual running costs will be $272.34.

The reduction of the Split System Operating Costs

It’s not difficult to cut down on your operating costs with a Split System. Depending on the model you purchase, and the star rating will determine just how much you can save annually. But looking beyond the initial cost to how you use the Split System can help as well.

Guide to Operating A Split System

• Set the thermostat between 24C and 26C for cooling. Any degree lower than that will increase your running costs by approximately 10%..
• Utilize the economy setting in the event that your split system is equipped with one. Ensure that you regularly service your air conditioning.
• Keep the sun’s heat out by closing curtains and blinds during the day. Close all doors and windows in areas that are cooling when the split system is running.
• When the split system has been switched off and its cooler outside, open the doors or windows and let cool air circulate.
• Insulate your property to help keep the cool summer air out and keep the heat inside during winter.
• Wear clothes that are appropriate for the weather conditions.

Why Choose Split Systems?

Air conditioning units mounted in wall are the most widely owned by homeowners who own a residential air conditioning system because they are cost-effective and simple to maintain.

Inverter Technology

Inverter technology is your mainstay for comfort all through the year because it maintains an even temperature, helps save costs (less energy consumption) and produces a lesser amount of noise when utilized. This is achieved through managing the speed of the compressor more precisely.

Affordable

Wall-mounted split AC models are most budget option for a small room apartment, small home or even a studio since they are inexpensive to buy (depending on the number of indoor units you’ll need) and don’t need duct work required.

Independent Temperature Control

Each indoor unit has the ability to control the area it is installed in, thus each room may have distinct temperature.

Air Quality

A lot of Split air conditioners include air filtering and humidity control features which regulate the amount of dust and humidity that can be found in the room. This allows for sensitive customers (children, elderly, asthmatic or allergic users) peace of body and mind.

Multi-Head Split Systems

Multi-Head Split Systems allow different indoor units to connect to a single outdoor condenser which provides the peace of mind that you have the ideal cooling system (in terms of physical and output constraints) to a specific space.

Split System FAQ

Are split systems similar to one would expect from an air conditioner?

It is true that Split System can be described as an air conditioner system. However, there are many types of air conditioning system includes;

• Split System Air Conditioning
• Multi- Head Split Air Conditioner
• Ducted refrigerated Air Conditioner

All of them operate on electricity & refrigerant under the same principle, but are different in terms of installation.

How long does it take to install a split system air conditioner?

In general an individual split-system air conditioner installation is expected to last between 3 and 6 hours. But, the exact amount of time will depend on various factors like below;

• The size and location of both the outdoor and indoor unit
• The routing of copper pipes between outdoor and indoor units
• Electrical connections from main switchboard to the A/C unit.

More Split System FAQ's

Do I need to replace or fix my AC unit?

In most situation, if your air conditioner is over > 10 years old and you notice obvious issues with your AC There is a high likelihood that it is cheaper to replace then repair.

To help you make the right choice, it is best to speak with the team at ComfyHome to give you an honest opinion on the condition of your AC.

What size of split system air conditioner will I require?

A standard measuring ratio will multiply the size of the room by a factor of 0.15 to get the needed power of the unit in kilowatt.

For a room area of 40 square metres, you’ll have a Split system air conditioning unit with 6 kW. An air conditioning unit of 2.5kW is suitable for rooms with 10-20 square meters. spaces.

The size of the Split system’s air conditioning requirements is also dependent on other factors such as the room insulation, amount of people residing there and’ place of residence.

To make an accurate determination of the Split unit size, please get in touch with us to request a thorough analysis.

More Split System FAQ's

How long can a split system air conditioner last?

In general the air conditioner is constructed to last for 10-20 years on an average. But this depends on a lot of variables, including the model of the AC as well as the quality of the installation, the routine maintenance history etc…

It is vital to check the maintenance of Your Split System AC on a regular basis to extend its life and increase effectiveness.

When should I clean my air conditioner’s filter?

As per Daikin Australia, it is highly recommended that you cleanse your air conditioning filters every two weeks to improve the efficiency of the system, and ultimately decrease your energy use by 5%-15%.

Burwood East Gas Heating Services

• Vulcan Ducted Gas Heating Servicing & Repair Burwood East
• Carbon Monoxide Testing Burwood East
• Gas Space Heater Repair Burwood East
• Gas Heating Burwood East
• Brivis Ducted Gas Heating Servicing & Repair Burwood East
• Evaporative Cooling Repair Burwood East
• Gas Hot Water System Installation & Repairs Burwood East
• Gas Heating Service Burwood East
• Ducted Gas Heating Servicing & Repair Burwood East
• Gas Appliance Servicing & Repair Burwood East
• Gas Heating Repairs Burwood East
• Braemar Ducted Gas Heating Servicing & Repair Burwood East
• Gas Log Fire Service & Repairs Burwood East
• Gas Heating Installation Burwood East
• Burwood East

What Types of Systems We Service & Repair

Every brand and type of heating requires its individual operation and maintenance requirements Our highly skilled technicians have the insight and expertise to provide the best service for all heating systems which includes:

• Ducted Heating Systems
• Evaporative Cooling Units
• Gas Space Heaters
• Gas Log Fires
• Split Systems
• Gas Hot Water Systems
• Gas Appliances

What Brands We Service

Our team has a wealth of experience with heating repair and maintenance, specialising in all styles and types of heating systems. We are proud of our rapid response time and dedication to efficiency, excellence and reliability.

We are able to service and maintain the majority of major brands of heating systems and units that include:

• Brivis
• Vulcan
• Braemar
• Rinnai, Carrier
• Pyrox, Honeywell
• Bonair, Lennox
• and many more…

8 Reasons To Hire Melbourne Heating Experts

• No Hidden Fees, Price Up Front
• Competitive Prices You Can Trust
• Professional Quality Workmanship Assurance
• Excellent Reputation & Reviews
• We’re friendly and personable.
• Professionally trained and licensed team
• Get a Free Quote and No obligation

Our Promise To You

We at Melbourne Ducted Heating Service we understand the difficulty of not having hot water and it’s something we don’t think anyone should need to go through. This is the reason we place an emphasis on hot water emergencies. All of our plumbers are courteous and reliable and without doubt, we will be able to help you in all situations.

We are proud of our service to customers and it is our firm belief that the tiny things are the most important.

We take pride in our outstanding customer service. here’s why our customers appreciate us:

• We always show up when we say we will.
• Our technicians will give you their number when they’re thirty minutes away.
• Competitive pricing upfront and expert advice prior to the start of the project.
• Always taking care to clean up after our own mess.

Our company Melbourne Ducted Heating Service offer emergency and maintenance services for electrical, plumbing and heating. If at any time you are unsure about our services and what we offer.