Split System Installation Mount Waverley

Split System Install in Mount Waverley

There’s nothing more satisfying than coming to your home on a hot day of 40 degrees and turning on your split system air-conditioning and within a matter of minutes your house and your family is cool.

Split system air conditioning provides such flexibility, which makes them difficult to beat. However, like all heaters and coolers to keep them running optimally they must be maintained and serviced to the highest standard by qualified experts. Melbourne Ducted Heating Service offers experienced technicians who know split system air-conditioners inside and out. They specialise in all makes and models of these units giving you the peace of mind that we will complete the task to professional standards.

We provide a variety of services that include the following:

• Split System Installation Mount Waverley
• Split System Repairs
• Split System Servicing

Our team of professionals in the field of heating and cooling are licensed and certified to perform all kinds of work. If you’re in search of split system installation Mount Waverley services then contact Local Heating and Cooling Professionals Mount Waverley today and talk with one of our friendly team members.

How Do Split Systems Work?

The split systems of air conditioning are their name due to half this system (condenser) located outside the house while the other part (fan coil) is inside. While cooling, warm air from inside the room is brought in by the fan coil before being is then removed, which results in cooling air returning to the house. While reverse cycle allows for heating pumps to run in reverse in order to provide warmth on cold winter days.

Split air conditioning systems are installed in individual rooms, areas , or rooms connected by copper piping to an outdoor unit (condenser). Multiple-headed split-air conditioning units are able to be fitted in as many as nine rooms using only one outdoor unit as well as allowing an individual temperature control for each room.

What Are The Ongoing Costs With Split Systems?

One of the brands we recommend to use for Split Systems is Mitsubishi Electric. If you are looking for the Mitsubishi Electric GE Series 2.5KW Split System, installed in an area that is small, and provides regular cooling and heating during the winter and summer periods, the annual running cost would be measured at $272.34.

The reduction of Split System Operating Costs

It’s not difficult to cut down on your operating costs with the Split System. Depending on the model that you purchaseand its star rating will determine just how much you’ll save per year. It is important to look beyond the initial price to how you make use of Your Split System can help as well.

Tips For Using Split Systems

• Set the thermostat between 24C and 26C for cooling. Any degree lower than that increases the running cost by about 10%..
• Use the economy setting if your split system has one. Also, you should regularly check the condition of your air conditioning.
• Make sure that the sun’s heat is kept out by closing curtains and external blinds in the morning. Close all doors and windows in areas being cooled when you have the split unit operating.
• If the split system is switched off and its cooler outside, you can open doors along with windows, allowing the cool air circulate.
• Insulate your property to help keep heat out in summer and in the winter months.
• Dress according to the weather conditions.

Why Choose Split Systems?

The wall mounted air conditioning system is among the most commonly used residential air conditioning system because they’re affordable and simple to maintain.

Inverter Technology

Inverter technology is your best option for greater comfort throughout the year as it maintains the temperature constant, cuts costs (less energy use) and produces a lesser amount of sound when it is it is used. This is accomplished by control of the compressor’s rotation speed more precisely.

Affordable

Wall mounted wall mounted split AC system are best cost-effective option for a single room apartment, small home or even a studio because they are relatively inexpensive to purchase (depending on how many indoor units you’ll need) and do not require duct work required.

Independent Temperature Control

Each indoor unit is able to control the temperature of the room it is installed in, so each room may have distinct temperature.

Air Quality

Many HVAC systems that are split have air filtering functions and humidity control which regulate the amount of dust and humidity inside the space. This gives sensitive customers (children or elderly, asthmatic or allergic consumers) the peace of mind and body.

Multi-Head Split Systems

Multi-Head Split Systems allow multiple indoor units to connect to one outdoor condenser, that in turn provides you with the convenience of having the perfect air conditioner (in terms of output and physical constraints) for the room you are in.

Split System FAQ

Are split systems the same thing as one would expect from an air conditioner?

Absolutely, Split System includes an air-conditioning unit. However, there are different kinds of air conditioning systems. This includes;

• Split System Air Conditioning
• Multi- Head Split Air Conditioner
• Ducted refrigerated Air Conditioner

All these systems operate with refrigerant and electricity under the same principle, but are different in terms.

How long will it take to install a split system air conditioner?

In general for a single split-system air conditioner installation will take 3-6 hours. The exact length of time may vary based on a variety of factors, such as below;

• The size and location of both outdoor and indoor unit
• The route of copper pipes between the outdoor unit and the indoor unit
• Electrical connections from the main switchboard up to the AC unit.

More Split System FAQ's

Should I replace or repair my cooling system?

In the majority cases in the event that your air conditioner is over > 10 years and has obvious issues with your AC there’s a good possibility that it will be cheaper to replace then repair.

In order to help you make the right choice It is recommended to speak with the team at ComfyHome to give you an honest opinion on the condition of your air conditioner.

What size of split system air conditioning will I require?

A standard measure ratio would be to multiply the space by a ratio of 0.15 to calculate the necessary power of the unit in kilowatt.

For a room area of 40 square meters, you will require a split system air conditioning unit that is 6 kW. A cooling unit of 2.5kW is the ideal size for rooms with 10-20 square meters. areas.

However, the amount of the Split system’s air conditioning will also be affected by other factors like the insulation of the room, the quantity of residents and’ locations.

To make an accurate determination of the needed Split units size we suggest that you contact us for a detailed analysis.

More Split System FAQ's

How long will an air conditioner split system last?

In general the air conditioner is designed to last between 10 and 20 years in the an average. But it depends on heaps of elements, such as the manufacturer of the air conditioner as well as the quality of the installation, routine service history etc…

It is important to service your Split System Air Conditioner often to extend its lifespan and improve efficiency.

When should I wash the air conditioner’s air filter?

As per Daikin Australia, it is strongly suggested that you should clean your air conditioning filters every two weeks to improve the efficiency of the system, and ultimately reduce energy consumption by 5%-15%.

Mount Waverley Gas Heating Services

• Gas Log Fire Service & Repairs Mount Waverley
• Gas Heating Service Mount Waverley
• Evaporative Cooling Repair Mount Waverley
• Gas Hot Water System Installation & Repairs Mount Waverley
• Vulcan Ducted Gas Heating Servicing & Repair Mount Waverley
• Braemar Ducted Gas Heating Servicing & Repair Mount Waverley
• Gas Heating Repairs Mount Waverley
• Gas Space Heater Repair Mount Waverley
• Mount Waverley
• Gas Heating Mount Waverley
• Carbon Monoxide Testing Mount Waverley
• Gas Appliance Servicing & Repair Mount Waverley
• Gas Heating Installation Mount Waverley
• Brivis Ducted Gas Heating Servicing & Repair Mount Waverley
• Ducted Gas Heating Servicing & Repair Mount Waverley

What Types of Systems We Service & Repair

Each type and brand of heating system has its specific operation and maintenance needs Our experienced technicians are knowledgeable and know how to provide first rate services across all kinds of heaters, for example:

• Ducted Heating Systems
• Evaporative Cooling Units
• Gas Space Heaters
• Gas Log Fires
• Split Systems
• Gas Hot Water Systems
• Gas Appliances

What Brands We Service

Our team has a wealth of experience in the field of heating repairs and maintenance with a focus on all models and types of heating systems. We pride ourselves on having a quick response time and commitment to quality, efficiency and reliability.

We are able to maintain and service the majority of important brands of heating units and systems such as:

• Brivis
• Vulcan
• Braemar
• Rinnai, Carrier
• Pyrox, Honeywell
• Bonair, Lennox
• and many more…

8 Reasons To Hire Melbourne Heating Experts

• No Hidden Fees, Price Up Front
• Competitive Prices You Can Trust
• Quality Workmanship Guaranteed
• Great Reputation & Reviews
• We’re personable and friendly
• Experienced & Licenced Team
• Request a Quote with No Costs

Our Promise To You

We at Melbourne Ducted Heating Service we understand the discomfort of not having hot water. This is something that we would never want anyone to suffer through. This is why we place top priority for hot water emergencies. All of our experienced plumbers are friendly and trustworthy, without a doubt we will be able to assist you in all situations.

We pride ourselves on our customer service and it is our belief that the small things count the most.

We are proud of our great customer service, here’s why our customers are so happy with us:

• We always arrive when we say we will.
• Our experts will give you their number when they’re thirty minutes away.
• Upfront competitive pricing and advice before we start the job.
• Always making sure we clean up after ourselves.

At Melbourne Ducted Heating Service offer emergency and maintenance services for plumbing, electrical and heating. If you have any questions regarding our services and what we offer.