Split System Installation Port Melbourne

Split System Installation in Port Melbourne

There’s nothing more enjoyable than coming to your home on a hot day and switching on your split system air conditioning and in just a couple of minutes your house and your family are cool.

Split system air-conditioning provides this the ability to be used in a variety of ways, making them difficult to beat. But like all heaters and coolers that are required to run optimally, they need to be checked and maintained in a professional manner by experienced professionals. Melbourne Ducted Heating Service offers experienced technicians who know your split system air-conditioners in and out. They specialise in all makes and models of these units giving you the confidence that we will complete the task to professional standards.

We offer a variety of services that include the following:

• Split System Installation Port Melbourne
• Split System Repairs
• Split System Servicing

Our team of heating and cooling professionals is licensed and qualified for all sorts of work. If you are looking for Split System Installation Port Melbourne services then contact Local Heating and Cooling Professionals Port Melbourne today and talk with one of our friendly team members.

How Do Split Systems Operate?

The split systems of air conditioning have their name because of half it (condenser) located outside the house while the other half (fan coil) is installed inside. In cooling, warm air from inside the room is absorbed from the fan coil, and then taken out, resulting into cooling air returning to the home. While reverse cycle allows for the heat pump to run in reverse to provide heat during cold days.

Systems for split air conditioners are installed in individual rooms, areas or multiple rooms that are connected via copper pipes with an outside unit (condenser). Systems with multi-head splits are able to be fitted in as many as nine rooms, with only one outdoor unit, and allow for the control of temperature for each room.

What Are The Running Costs With Split Systems?

One of the brands we recommend of Split Systems is Mitsubishi Electric. If you are looking for the Mitsubishi Electric GE Series 2.5KW Split System, installed in an area that is small, and provides regular cooling and heating during the summer and winter seasons, the annual running cost would be $272.34.

The reduction of split system Operating Costs

It doesn’t take much to lower your running expenses with a Split System. Based on the model you purchase, and the star rating will determine how much you will save each year. It is important to look beyond the initial cost to how you will use it Split System can help as well.

Tips For Using Split Systems

• Set the thermostat between 24C and 26C for cooling. Any degree lower than that increases the running cost by about 10%..
• Choose the economy option when your split has one. You should also regularly maintain your air conditioner.
• Make sure that the sun’s heat is kept out by closing the curtains and exterior blinds during the daytime. Close all doors and windows in areas that are cooled when your split systems are on.
• When the split system has been switched off , and the cooler outside, open doors and windows to let cool air flow in.
• Insulate your home to keep warm summer days out and cool inside during winter.
• Wear clothes that are appropriate for the weather conditions.

Why Choose Split Systems?

Wall mounted split air conditioning systems are the most widely used air conditioning systems for homes because they’re affordable and easy to maintain.

Inverter Technology

Inverter technology is your best option for greater comfort throughout the year since it keeps the temperature at a constant level, reduces costs (less energy consumption) and generates less noise when it is used. This is achieved through controlling the compressor rotation speed more precisely.

Affordable

Wall mounted divided AC system are best affordable option for a one room apartment, small home or even a studio since they are inexpensive to buy (depending on the amount of indoor units you’ll need) and do not require requirement for ductwork.

Independent Temperature Control

Each indoor unit has the ability to control the temperature of the room it is placed in, so each room is able to have various temperature.

Air Quality

A lot of HVAC systems that are split include air filtering functions and humidity control that control the amount of dust and humidity inside the room. This allows for sensitive customers (children and elderly, asthmatic or allergic users) an unwinding mind and body.

Multi-Head Split Systems

Multi-Head Split Systems permit multiple indoor units to connect to one outdoor condenser which gives you the comfort of having the perfect AC (in terms of output and physical constraints) for a particular room.

Split System FAQ

Are split systems the same thing as an air conditioner?

Absolutely, Split System includes an air-conditioning unit. However, there are different kinds of air conditioning systems. These include;

• Split System Air Conditioning
• Multi- Head Split Air Conditioner
• Ducted refrigerated Air Conditioner

Each system operates by using refrigerant and electricity. They all operate on the same principal but very different in terms of installation.

What is the time frame to install a split-system air conditioner?

In general an individual split system air conditioning installation will take between 3-6 hours. But, the exact amount of time will depend on a variety of factors, such as below;

• Location and size of both the outdoor and indoor unit
• The routing of copper pipes between the outdoor unit and the indoor unit
• Electrical connections from main switchboard up to the AC unit.

More Split System FAQ's

Should I replace or repair the air conditioning unit in my home?

In the majority of cases when your air conditioner is at least 10-years-old and you notice obvious issues with your AC there’s a great possibility that it will be less expensive to replace it than to repair it.

To assist you in making the best decision To make the right choice, speak with the team at ComfyHome to provide you with an honest assessment on the state of your air conditioner.

What size of split system air conditioning do I need?

A common measurements ratio is multiple the size of the room by a ratio of 0.15 to get the needed power of the unit in Kilowatts.

For a space of 40 square metres, you’ll need a Split system air conditioning unit of 6 kW. A unit with a cooling capacity of 2.5kW is perfect for 10-20 square meter room areas.

The size of the Split system air conditioning required is also affected by other variables such as the insulation in the room, the size of the room, and’ place of residence.

To get an accurate estimate of the Split Unit size please contact us for a comprehensive analysis.

More Split System FAQ's

How long does a split system air conditioner last?

In general an air conditioner is built to last 10-20 years, on an average. However, this is contingent upon a myriad of elements, such as the manufacturer of the air conditioner and the quality of the installation, regular service history, etc…

It is essential to service your split system air conditioner on a regular basis for a longer life span and to increase effectiveness.

How often should I wash my air conditioner air filter?

According to Daikin Australia, it is strongly recommended to wash your air conditioner’s filters every two weeks in order to boost the efficiency of the system, and ultimately decrease your energy use by 5 to 15 15%.

Port Melbourne Gas Heating Services

• Braemar Ducted Gas Heating Servicing & Repair Port Melbourne
• Gas Appliance Servicing & Repair Port Melbourne
• Gas Log Fire Service & Repairs Port Melbourne
• Vulcan Ducted Gas Heating Servicing & Repair Port Melbourne
• Gas Heating Installation Port Melbourne
• Port Melbourne
• Gas Heating Port Melbourne
• Carbon Monoxide Testing Port Melbourne
• Gas Heating Service Port Melbourne
• Evaporative Cooling Repair Port Melbourne
• Gas Hot Water System Installation & Repairs Port Melbourne
• Ducted Gas Heating Servicing & Repair Port Melbourne
• Gas Heating Repairs Port Melbourne
• Brivis Ducted Gas Heating Servicing & Repair Port Melbourne
• Gas Space Heater Repair Port Melbourne

What Types of Systems We Service & Repair

Each brand and style of heating requires its own operation and maintenance Our highly skilled technicians have the knowledge and experience to offer first rate services for all heating systems for example:

• Ducted Heating Systems
• Evaporative Cooling Units
• Gas Space Heaters
• Gas Log Fires
• Split Systems
• Gas Hot Water Systems
• Gas Appliances

What Brands We Service

Our team has many years experience in repairs and maintenance of heating systems, specialising in all styles and brands of heating systems. We take pride in a fast response time and dedication to quality, efficiency and reliability.

We can service and maintain all major brands of heating units and systems such as:

• Brivis
• Vulcan
• Braemar
• Rinnai, Carrier
• Pyrox, Honeywell
• Bonair, Lennox
• and many more…

8 Reasons To Hire Melbourne Heating Experts

• No Hidden Fees, Price Up Front
• Competitive Prices You Can Trust
• Professional Quality Workmanship Assurance
• Great Reviews & Reputation
• We’re personable and friendly
• Professionally trained and licensed team
• Get a Quote Without Costs

Our Promise To You

At Melbourne Ducted Heating Service we understand the frustration of not having hot water and it’s something that we would never want anyone to need to go through. This is why we put such a high priority on emergencies with hot water. All of our plumbers are friendly and trustworthy Without a doubt, we can assist you in any situation.

We are proud of our service to customers and it is our firm belief that the tiny things are the most important.

We pride ourselves on our great customer service, this is why our customers appreciate us:

• We always show up when promise to be there.
• Our technicians will give you the number to call them when they are thirty minutes away.
• Pricing upfront competitive and guidance before we begin the work.
• Always cleaning up after our own mess.

At Melbourne Ducted Heating Service offer emergency and maintenance services in plumbing, electrical, and heating. If you have any questions regarding our services, and the services we can offer, please contact us.