Split System Installation Notting Hill

Split System Install in Notting Hill

There’s nothing better than arriving home to a 40-degree day, flipping on your split-system air conditioning and in just a couple of minutes the house and your family will be cool.

Split system air-conditioning offers such versatility, making them hard to beat. But like all heaters and coolers that are required to run to their maximum they must be checked and maintained in a professional manner by qualified experts. Melbourne Ducted Heating Service offers experienced technicians that know your split system air-conditioners in and out. They specialize in all models and models of these units offering you assurance that we will finish the job to professional standards.

We offer a variety of services, which include the following:

• Split System Installation Notting Hill
• Split System Repairs
• Split System Servicing

Our team of experts in heating and cooling is licensed and qualified to perform all kinds of work. If you’re searching for split system installation in Notting Hill services then contact Local Heating and Cooling Professionals Notting Hill today and talk to one of our knowledgeable team members.

How Do Split Systems Work?

Split air conditioning systems earn their name because of half it (condenser) located outside the home, while the other half (fan coil) is located inside. When it cools, warm air inside the room is taken in by the fan coil before being taken out, resulting into cool air recirculating back into the home. Reverse cycle allows heating pumps to run in reverse to provide heat on cold winter days.

Split air conditioning systems can be installed to specific rooms, areas or even multiple rooms that are connected via copper pipes with an outside unit (condenser). Systems with multi-head splits are able to be fitted for at least nine rooms using only one outdoor unit, as well as allowing separate temperature control for each room.

What Are The Running Costs With Split Systems?

One of the top brands for Split Systems is Mitsubishi Electric. If you are looking for the Mitsubishi Electric GE Series 2.5KW Split System, installed in a small room providing regular cooling and heating throughout the summer and winter seasons The annual operating cost would be measured at $272.34.

Lowering Split System Operating Costs

It’s not difficult to lower your running expenses with a Split System. The model you buy, as well as its star rating, you will be able to determine how much you will save each year. But looking beyond the initial cost and how you utilize the Split System can help as well.

Guide to Operating Split Systems

• Set the thermostat to 24C and 26, which is the ideal temperature for cooling. Any degree lower than that will increase the running costs by around 10%.
• Utilize the economy setting if your split system has one. You should also regularly maintain your air conditioner.
• Keep the sun’s heat out by closing the curtains and exterior blinds during the day. Close all doors and windows in areas being cooled when the split system is in operation.
• If the split system is shut off and the cooler outside, open doors along with windows, allowing cool air in.
• Insulate your home to keep the cool summer air out and keep the heat inside during winter.
• Dress appropriately for the weather.

Why Select A Split System?

Split air conditioners mounted on walls are the most frequently used air conditioning systems for homes since they are inexpensive and easily to maintain.

Inverter Technology

Inverter technology is your most effective way to enjoy more comfort throughout the year since it keeps the temperature constant, cuts costs (less consumption of energy) and generates less sound when it is utilized. This is achieved by controlling the compressor rotation speed more precisely.

Affordable

Wall-mounted divided AC units are your most budget option for a small room or apartment since they are inexpensive to purchase (depending on the amount of indoor units you need) and don’t need requirement for ductwork.

Independent Temperature Control

Each indoor unit has the ability to control the room that it is placed in, thus each room could have different temperatures.

Air Quality

A lot of HVAC systems that are split feature air filtering and humidity control functions which regulate the amount of dust and humidity in the room. This gives sensitive customers (children older, asthmatic, or allergic people) peace of mind and body.

Multi-Head Split Systems

Multi-Head Split Systems allow multiple indoor units to connect to one outdoor condenser, which provides the comfort of having the ideal cooling system (in terms of physical and output constraints) for a particular room.

Split System FAQ

Are split systems the same thing as one would expect from an air conditioner?

Absolutely, Split System is an air conditioning system. However, there are many types of air conditioning system include;

• Split System Air Conditioning
• Multi- Head Split Air Conditioner
• Ducted refrigerated Air Conditioner

All of them operate by using refrigerant and electricity. They all operate on the same principle, but are different in terms of how they are installed.

How long will it take to set up a split system air conditioner?

In general an individual AC split installation should take between 3-6 hours. The exact length of time will depend on various factors like below;

• The size and location of both the outdoor and indoor unit
• The route of copper pipes between the outdoor unit and indoor unit
• Electrical connections from main switchboard to the A/C unit.

More Split System FAQ's

Do I need to replace or fix my air conditioner?

In most situation in the event that your A/C is more than 10 years old and there are apparent issues with your air conditioner there’s a good possibility that it will be less expensive to replace it than to repair it.

To help you make the right decision for your needs, consult with the staff at ComfyHome to give you an honest assessment on the condition of your air conditioner.

What size split system air conditioning will I require?

A common measurement ratio is to multiply the size of the room by a ratio of 0.15 to get the needed power of the unit in kilowatt.

For a space of 40 square meters, you will need a Split system air conditioning unit of 6 kW. A unit with a cooling capacity of 2.5kW is the ideal size for 10-20 sqm rooms areas.

The size of the Split system air conditioning required is also dependent on other factors such as the insulation of the room, the number of occupants and residents’ location.

For an accurate assessment of the Split dimension, we suggest that you call us for a more detailed analysis.

More Split System FAQ's

What is the longest a split system air conditioner last?

In general an air conditioner is built to last from 10-20 years, on average. But it depends on heaps of things like the brand of the A/C as well as the quality of the installation, routine maintenance history and more…

It is important to service your Split System Air Conditioner on a regular basis to prolong lifetime and enhance effectiveness.

Do I need to clean my air conditioner air filter?

Based on Daikin Australia, it is strongly recommended that you wash your air conditioner’s filters every two weeks to improve the efficiency of the system and decrease your energy use by 5%-15 percentage.

Notting Hill Gas Heating Services

• Gas Hot Water System Installation & Repairs Notting Hill
• Gas Heating Service Notting Hill
• Gas Space Heater Repair Notting Hill
• Gas Heating Installation Notting Hill
• Vulcan Ducted Gas Heating Servicing & Repair Notting Hill
• Gas Heating Repairs Notting Hill
• Gas Log Fire Service & Repairs Notting Hill
• Evaporative Cooling Repair Notting Hill
• Braemar Ducted Gas Heating Servicing & Repair Notting Hill
• Gas Appliance Servicing & Repair Notting Hill
• Carbon Monoxide Testing Notting Hill
• Brivis Ducted Gas Heating Servicing & Repair Notting Hill
• Ducted Gas Heating Servicing & Repair Notting Hill
• Gas Heating Notting Hill

What Types of Systems We Service & Repair

Every brand and type of heating requires its own maintenance and operation Our experienced technicians are knowledgeable and experience to offer the best service across all kinds of heaters including:

• Ducted Heating Systems
• Evaporative Cooling Units
• Gas Space Heaters
• Gas Log Fires
• Split Systems
• Gas Hot Water Systems
• Gas Appliances

What Brands We Service

Our team has years of experience with heating repair and maintenance with a focus on all models and brands of heating systems. We pride ourselves on a rapid response time as well as a commitment to quality, efficiency and reliability.

We can service and maintain all important brands of heating systems and units which include:

• Brivis
• Vulcan
• Braemar
• Rinnai, Carrier
• Pyrox, Honeywell
• Bonair, Lennox
• and many more…

8 Reasons To Hire Melbourne Heating Experts

• Price Up-Front, No Hidden Fees
• Low Prices You Can Trust
• Quality Workmanship Guaranteed
• Great Reputation & Reviews
• We’re personable and friendly
• Professionally trained and licensed team
• Request a Quote with No obligation

Our Promise To You

At Melbourne Ducted Heating Service we understand the frustration of not having hot water, and it’s something we believe no one should suffer through. This is why we put an emphasis on hot water emergencies. Our plumbers are friendly and trustworthy Without a doubt, we can assist you in any circumstance.

We take pride in our customer service , and it is our conviction that the minor things matter most.

We take pride in our outstanding customer service. this is why our customers appreciate us:

• We always show up when declare that we will.
• Our staff will give you an appointment when they are 30 minutes away.
• Price upfront, competitive and professional advice prior to the start of the project.
• Always taking care to clean up after us.

At Melbourne Ducted Heating Service offer emergency and maintenance services in plumbing, electrical, and heating. If you have some questions about our services and what we provide, we are here to help.