Split System Installation Seaford

Split System Installation in Seaford

There’s nothing more satisfying than coming to your home on a hot 40-degree day, turning on your split system air conditioning and in just a couple of minutes your house and your family is cool.

Split system air-conditioning offers such versatility, making them hard to beat. But , just like all heaters or coolers that are required to run at their peak they must be maintained and maintained to a high standard by skilled professionals. Melbourne Ducted Heating Service offers experienced technicians that know your split system air-conditioners both inside and outside. They specialise in all makes and models of these units and give you assurance that we will finish the job to a professional standard.

We provide a range of services that comprise the following:

• Split System Installation Seaford
• Split System Repairs
• Split System Servicing

Our team of experts in heating and cooling are fully qualified and licensed to perform all kinds of work. If you’re looking for split system installation in Seaford services then contact Local Heating and Cooling Professionals Seaford today and talk with one of our friendly team members.

How Do Split Systems Work?

Split air conditioning systems earn their name because half of it (condenser) is located outside of the house while the other half (fan coil) is located inside. While cooling, warm air inside the room is absorbed through the fan coil and removed, resulting in cool air flowing back into the home. The reverse cycle permits that the heating system to run in reverse, providing heating in cold weather.

Split air conditioning systems can be placed in rooms, areas , or rooms that are connected via copper pipes into an outdoor unit (condenser). Multiple-headed split-air conditioning units are able to be fitted for at least nine rooms and only one outdoor unit, as well as allowing the control of temperature for each room.

What Are The Running Costs With Split Systems?

One of our recommended brands to use for Split Systems is Mitsubishi Electric. If you are looking for a Mitsubishi Electric GE Series 2.5KW Split System, installed in an area that is small, and provides regular heating & cooling during the summer and winter seasons and the annual running costs will be $272.34.

Reduced split system Running Costs

It’s not hard to reduce your running costs with a Split System. The model you purchase, and it’s respective star rating will determine just how much you will save each year. But looking beyond the initial cost and how you will use it Split System can help as well.

Tips For Operating Split Systems

• Set the thermostat between 24C and 26, which is the ideal temperature for cooling. Each degree less in summer will raise the cost of running by 10%..
• Choose the economy option when your split has one. Also, you should regularly check the condition of your air conditioning.
• Keep the sun’s heat out by closing curtains and external blinds in the morning. Close the doors and windows of areas that are cooling when your split systems are on.
• When the split system has been turned off and the cooler is outside, you can open doors as well as windows in order to let the cool air flow in.
• Insulate your property to help keep summer heat out and the cold in the winter months.
• Dress to suit the weather.

Why Choose Split Systems?

Air conditioning units mounted in wall are the most commonly owned residential air conditioning system because they are cost-effective and simple to maintain.

Inverter Technology

Inverter technology is your mainstay for comfort all through the year since it keeps the temperature at a constant level, reduces costs (less energy consumption) and produces relatively less sound when it is it is used. This is achieved through managing the speed of the compressor more precisely.

Affordable

Wall mounted Split AC models are best budget option for a small room or apartment since they are inexpensive to buy (depending on how many indoor units you need) and don’t need requirement for ductwork.

Independent Temperature Control

Each indoor unit has the ability to control the temperature of the room it is located in, which means that each room is able to have various temperature.

Air Quality

Many AC splits come with air filtering and humidity control features that regulate the amount of dust and humidity in the room. This allows for sensitive customers (children or elderly, asthmatic or allergic customers) peace of body and mind.

Multi-Head Split Systems

Multi-Head Split Systems enable multiple indoor units to be connected to one outdoor condenser, that in turn provides you with the peace of mind that you have the perfect AC (in terms of output and physical restrictions) for a particular room.

Split System FAQ

Is a split system the same thing as one would expect from an air conditioner?

It is true that Split System can be described as an air conditioner system. However, there are many kinds of air conditioning systems. It that include

• Split System Air Conditioning
• Multi- Head Split Air Conditioner
• Air conditioners that are duct-fed refrigerated

Each system operates with refrigerant and electricity under the same principle, but are different in terms of how they are installed.

How long does it take to install a split-system air conditioner?

In general, a single split-system air conditioner installation should take between 3-6 hours. But, the exact amount of time may vary based on a variety of factors, such as below;

• Dimensions and position of both indoor and outdoor unit
• The route of copper pipes between the outdoor unit and the indoor unit
• Electrical connections from main switchboard up to the AC unit

More Split System FAQ's

Should I replace or repair my cooling system?

In most situation, if your A/C is more than 10 years of age and you notice noticeable issues with your A/C there’s a great possibility that it will be less expensive to replace it than to repair it.

To assist you in making the right choice It is recommended to consult with the staff at ComfyHome to give you an honest evaluation of the state of your air conditioner.

What size of split system air conditioner do I need?

A common measuring ratio will multiply the size of the room by a factor of 0.15 in order to determine the power of the device in kilowatts.

For a space of 40 square metres, you’ll need a Split system air conditioning unit of 6 kW. A unit with a cooling capacity of 2.5kW is ideal for 10 -20 sqm room areas.

However, the size of the Split system’s air conditioning is also affected by other variables such as the insulation of the room, the size of the room, and’ location.

For an accurate assessment of the Split unit size, we suggest that you call us for a more detailed analysis.

More Split System FAQ's

How long will an air conditioner split system last?

In general an air conditioner is designed to last between 10 and 20 years on an average. However, this is contingent upon a myriad of variables, including the brand of the A/C it is installed on, the quality of its installation, regular service history, and more…

It is essential to service the Split System air conditioner on a regular basis to extend its lifespan and improve effectiveness.

How often should I wash my air conditioner air filter?

According to Daikin Australia, it is highly recommended that you wash your air conditioner’s filters every two weeks to improve the efficiency of your system and possibly decrease your energy use by 5%-15 15%.

Seaford Gas Heating Services

• Ducted Gas Heating Servicing & Repair Seaford
• Gas Space Heater Repair Seaford
• Gas Hot Water System Installation & Repairs Seaford
• Evaporative Cooling Repair Seaford
• Carbon Monoxide Testing Seaford
• Gas Heating Repairs Seaford
• Seaford
• Gas Heating Seaford
• Brivis Ducted Gas Heating Servicing & Repair Seaford
• Vulcan Ducted Gas Heating Servicing & Repair Seaford
• Gas Heating Service Seaford
• Braemar Ducted Gas Heating Servicing & Repair Seaford
• Gas Appliance Servicing & Repair Seaford
• Gas Log Fire Service & Repairs Seaford
• Gas Heating Installation Seaford

What Types of Systems We Service & Repair

Each model and brand of heating system has its own operation and maintenance Our highly skilled technicians are knowledgeable and know how to provide top-quality services across all kinds of heaters, which includes:

• Ducted Heating Systems
• Evaporative Cooling Units
• Gas Space Heaters
• Gas Log Fires
• Split Systems
• Gas Hot Water Systems
• Gas Appliances

What Brands We Service

Our team has a wealth of experience in the field of heating repairs and maintenance that specialize in all kinds and models of heating systems. We pride ourselves on having a rapid response time and dedication to efficiency, excellence and reliability.

We can service and maintain the majority of major brands of heating systems and units such as:

• Brivis
• Vulcan
• Braemar
• Rinnai, Carrier
• Pyrox, Honeywell
• Bonair, Lennox
• and many more…

8 Reasons To Hire Melbourne Heating Experts

• No Hidden Fees, Price Up Front
• Low Prices You Can Trust
• High-Quality Workmanship Guaranteed
• Excellent Reputation & Reviews
• We’re personable and friendly
• Professionally trained and licensed team
• Get a Quote Without Costs

Our Promise To You

At Melbourne Ducted Heating Service we understand the inconvenience of not having any hot water. It’s a situation we believe no one should have to experience. This is why we place such a high priority on hot water emergencies. All of our plumbers are courteous and reliable and without doubt, we will be able to help you in any situation.

We are proud of our customer service and it is our belief that the tiny things are the most important.

We pride ourselves on our outstanding customer service. this is why our customers appreciate us:

• We will always be there when we tell you we will.
• Our staff will give you an appointment when they are 30 minutes away.
• Price upfront, competitive and professional advice prior to the start of the project.
• Always taking care to clean up after our own mess.

Our company Melbourne Ducted Heating Service offer emergency and maintenance services for plumbing, heating, and electrical. If at any time you are unsure about our services and what we can offer, please contact us.