Split System Installation Brighton

Split System Installation in Brighton

There’s nothing better than arriving home to a day of 40 degrees and flipping on your split-system air conditioning, and in a matter of minutes , your home and your family is cool.

Split system air-conditioning offers such flexibility, which makes them difficult to beat. Like all heaters and coolers to make sure they’re running optimally it is essential to have them maintained and serviced at a high level by qualified experts. Melbourne Ducted Heating Service offers experienced technicians who know split system air conditioners in and out. They specialize in all models and models of these units offering you assurance that we can get the job done in a professional manner.

We provide a variety of services, which include the following:

• Split System Installation Brighton
• Split System Repairs
• Split System Servicing

Our team comprised of HVAC and Cooling experts are licensed and fully trained to perform all kinds of tasks. If you’re searching for split system installation in Brighton services then contact Local Heating and Cooling Professionals Brighton today and talk with one of our friendly team members.

How Do Split Systems Function?

The split systems of air conditioning have the name because of one half of this system (condenser) is located outside of the house , while the other half (fan coil) is installed inside. When cooling, the hot air that is inside the room is taken in by the fan coil before being is then removed, which results in cool air being recirculated back into the house. Reverse cycle allows heating pumps to run in reverse in order to provide warmth during colder days.

Systems for split air conditioners are fitted to individual rooms, zones or rooms connected by copper piping with an outside unit (condenser). Multi-head split air conditioning systems can be used in as many as nine rooms with only one outdoor unit and allow for individual temperature control of each room.

What Are The Running Costs For Split Systems?

One of the most recommended brands to use for Split Systems is Mitsubishi Electric. For a Mitsubishi Electric GE Series 2.5KW Split System, installed in the smallest of rooms, providing regular cooling and heating throughout the summer and winter seasons, the annual running cost is $272.34.

Reducing split system Operating Costs

It’s easy to reduce your running costs by using a Split System. Depending on the model that you purchase, and the star rating will determine just how much you will save each year. But looking beyond the initial cost and how you will use Your Split System can help as well.

Tips For Operating A Split System

• Set the thermostat to 24C and 26, which is the ideal temperature for cooling. Every degree lower in summer increases the running cost by 10%..
• Use the economy setting if your split system has one and regularly service your air cooling system.
• Keep the sun’s heat away by closing curtains and blinds during the daytime. Close doors and windows to areas that are cooling when your split systems are on.
• When the split system has been switched off and its cooler outside, you can open doors as well as windows in order to let cool air inside.
• Insulate your home to keep the summer heat out and the cold inside in winter.
• Dress to suit the weather conditions.

Why Choose A Split System?

Air conditioning units mounted in wall are among the most commonly used air conditioning systems for homes since they are inexpensive and simple to maintain.

Inverter Technology

Inverter technology is your most effective way to enjoy more comfort throughout all seasons since it ensures an even temperature, helps save costs (less consumption of energy) and produces a lesser amount of sound when it is used. This is achieved through managing the speed of the compressor more precisely.

Affordable

Wall-mounted divided AC models are most cost-effective option for a single room, apartment or small house as they are relatively cheap to purchase (depending on the amount of indoor units you will require) and don’t need installation of ducts.

Independent Temperature Control

Each indoor unit has the ability to control the area it is situated within, and each space is able to have various temperature.

Air Quality

A lot of AC splits have air filtering and humidity control functions that control the amount of dust and humidity inside a room. This gives sensitive customers (children or elderly, asthmatic or allergic customers) peace of body and mind.

Multi-Head Split Systems

Multi-Head Split Systems enable multiple indoor units to connect to a single outdoor condenser which gives you the comfort of having the best Air conditioner (in terms of output and physical restrictions) for a particular room.

Split System FAQ

Is a split system similar to an air conditioner?

Absolutely, Split System can be described as an air conditioner system. However, there are many kinds of air conditioning systems. This that include

• Split System Air Conditioning
• Multi- Head Split Air Conditioner
• Ducted refrigerated Air Conditioner

Each of these systems operates on electricity & refrigerant under the same principal but very different in terms of installation.

How long does it take to install a split-system air conditioner?

In general for a single AC split installation is expected to take between 3-6 hours. But, the exact amount of time could vary based on many factors such as below:

• The size and location of both outdoor and indoor unit
• The routing of copper pipes between indoor and outdoor unit
• Electrical connections from main switchboard to the A/C unit.

More Split System FAQ's

Should I replace or repair my cooling system?

In the majority cases the air conditioner is more than 10 years and there are obvious issues with your AC There is a high likelihood that it is cheaper to replace then repair.

To help you make the best decision, it is best to contact the experts at ComfyHome to get an honest assessment on the state of your air conditioner.

What size of split system air conditioner do I need?

The standard measurement ratio is to multiple the size of the room by a ratio of 0.15 to get the needed power of the device in kilowatts.

For a space of 40 square meters, you will have a Split system air conditioning unit with 6 kW. A unit that can cool the air at 2.5kW is suitable for 10-20 sqm rooms areas.

However, the size of the Split system air conditioning required can also be affected by other factors like how well the insulation is in place, the size of the room, and’ locations.

To get an accurate estimate of the Split Unit size we suggest you contact us for a detailed analysis.

More Split System FAQ's

How long can an air conditioner split system last?

In general the air conditioner is constructed to last for 10-20 years in the average. But it depends on heaps of factors such as the brand of the A/C, quality of the installation, routine maintenance history etc…

It is vital to check the maintenance of your split system air conditioner often to extend its life and increase effectiveness.

Do I need to wash my air conditioner’s air filter?

In accordance with Daikin Australia, it is strongly suggested that you should take care to clean your air conditioning filter every 2 weeks to increase the efficiency of the system, and ultimately reduce energy consumption by 5 to 15 percent.

Brighton Gas Heating Services

• Brivis Ducted Gas Heating Servicing & Repair Brighton
• Gas Appliance Servicing & Repair Brighton
• Gas Heating Repairs Brighton
• Gas Hot Water System Installation & Repairs Brighton
• Evaporative Cooling Repair Brighton
• Gas Log Fire Service & Repairs Brighton
• Vulcan Ducted Gas Heating Servicing & Repair Brighton
• Brighton
• Gas Heating Brighton
• Gas Heating Installation Brighton
• Braemar Ducted Gas Heating Servicing & Repair Brighton
• Gas Heating Service Brighton
• Carbon Monoxide Testing Brighton
• Gas Space Heater Repair Brighton
• Ducted Gas Heating Servicing & Repair Brighton

What Types of Systems We Service & Repair

Each brand and style of heating system has its own maintenance and operation Our highly skilled technicians have the insight and know how to provide first rate services for all heating systems including:

• Ducted Heating Systems
• Evaporative Cooling Units
• Gas Space Heaters
• Gas Log Fires
• Split Systems
• Gas Hot Water Systems
• Gas Appliances

What Brands We Service

Our team has many years experience in heating repairs and maintenance with a focus on all models and brands of heating equipment. We take pride in a rapid response time as well as a commitment to quality, efficiency and reliability.

We service and maintain the leading brands of heating systems and units, including:

• Brivis
• Vulcan
• Braemar
• Rinnai, Carrier
• Pyrox, Honeywell
• Bonair, Lennox
• and many more…

8 Reasons To Hire Melbourne Heating Experts

• Price Up-Front, No Hidden Fees
• Great Prices You Can Trust
• Professional Quality Workmanship Assurance
• Great Reputation & Reviews
• We’re friendly, personable and polite.
• Experienced & Licenced Team
• Get a Quote Without Costs

Our Promise To You

At Melbourne Ducted Heating Service we understand the difficulty of not having hot water. It’s a situation that we would never want anyone to need to go through. This is why we put the highest priority on emergencies involving hot water. Our plumbers are trustworthy and friendly We can assist with any emergency.

We pride ourselves on our customer service and it is our belief that even the small things count the most.

We pride ourselves on our excellent customer service. and here’s the reason our customers appreciate us:

• We always arrive when we promise to be there.
• Our experts will give you the number to call them when they are thirty minutes away.
• Price upfront, competitive and professional advice before we even begin the job.
• Always getting our hands clean after ourselves.

Our company Melbourne Ducted Heating Service offer emergency and maintenance services for plumbing, electrical and heating. If at any time you have questions about our services and the products we can offer, please contact us.